Anet ET4 Firmware Update V1.1.2
The firmware update of Anet ET4 (the version without capacitive leveling sensor) V1.1.2 has improved from the following places:
・ Modify the filament retreat phenomenon after refueling and back to print.
・ Reduce the Z-axis moving and acceleration speed.
・ Shorten the trigger time for thermal runaway protection.
・ Add French user interface
・ Limit the work of the limit switch only when homing.
・ Modify "Load and Unload" translation,
・ The control button works only after homing or automatic leveling or manual leveling or homing compensation has been completed. The motor stops after prints finish.
Download link: ET4 V1.1.2